Speciality Tapes Industry

Semi-Open Cell Spacer Tape is a type of adhesive foam tape that combines features of both open-cell and closed-cell foam structures. It has a partially open-cell structure, meaning it retains some of the flexibility, compressibility, and cushioning properties of open-cell foam while offering better moisture resistance and a more durable seal, similar to closed-cell foam.

Double-sided tape is any pressure-sensitive tape that is coated with adhesive on both sides.^[1] It is designed to stick two surfaces together, often in a way which is not visible in the end product, due to it being in between the objects rather than overlaying them. This allows for neater-looking projects and better craftsmanship. Double-sided tape can be either thin or dimensional. Dimensional tape is thicker, and is of particular use to retail and signage uses where it can be used to allow signs or displays to stand out with a 3-D effect.

Double-sided tape is created by applying a thin adhesive layer to each side of a carrier material. For example, double-sided tissue tape, an easy-to-rip double-sided tape, is created by applying adhesive to two sides of tissue paper, which is then wound with a silicone paper to avoid it sticking to itself. Most adhesive tapes are manufactured in log form, such as a large 1 to 3 meter wide roll, and then an adhesive tape converter is used to slit the rolls into the required widths.

Features : 

• Good insulation property, Water and chemical resistant, longer life and good strength.

Usage :

• Polyester Tapes with single side adhesive coating are used as insulation in electronics and electrical industries.
• Special adhesive coated Polyester tapes are used as holding tapes in all electronic appliances.

Features : 

• Good insulation property, Water and chemical resistant, longer life and good strength.

Usage :

• Polyester Tapes with single side adhesive coating are used as insulation in electronics and electrical industries.
• Special adhesive coated Polyester tapes are used as holding tapes in all electronic appliances.

• Double Sided Tissue Tapes is made from non-woven-tissue paper coated on both sides with acrylic adhesive or hot melt rubber adhesive and laminated with release paper.
• Tissue Tape made with wide range of adhesive to get different adhesion level and so makes its application wider. We are using Printed as well as different color release paper.
• We also make Repulpable Tissue tapes for news paper and printing industries and which is environmental friendly products as its fully recyclable.
• Our Double sided tissue tape has RICH and ROHS approval from SGS. This makes our tapes to be applied for all products which is been for export to Europe and all over the worlds.

• Excellent tack and good strength for immediate bonding, good resistance to solvent, heat and chemical.

• Foam and felt lamination in automobile and appliances manufacturing, Splicing of films / paper / foils, lamination and fastening in paper /plastic and printing industries, adhere posters envelopes, in shoe and leather industry, for computerized embroidery, for mounting nameplates, metal / polycarbonate stickers etc.

• Double Sided Tissue Tapes is made from non-woven-tissue paper coated on both sides with acrylic adhesive or hot melt rubber adhesive and laminated with release paper.
• Tissue Tape made with wide range of adhesive to get different adhesion level and so makes its application wider. We are using Printed as well as different color release paper.
• We also make Repulpable Tissue tapes for news paper and printing industries and which is environmental friendly products as its fully recyclable.
• Our Double sided tissue tape has RICH and ROHS approval from SGS. This makes our tapes to be applied for all products which is been for export to Europe and all over the worlds.

• Excellent tack and good strength for immediate bonding, good resistance to solvent, heat and chemical.

• Foam and felt lamination in automobile and appliances manufacturing, Splicing of films / paper / foils, lamination and fastening in paper /plastic and printing industries, adhere posters envelopes, in shoe and leather industry, for computerized embroidery, for mounting nameplates, metal / polycarbonate stickers etc.

Double-sided tape is any pressure-sensitive tape that is coated with adhesive on both sides.^[1] It is designed to stick two surfaces together, often in a way which is not visible in the end product, due to it being in between the objects rather than overlaying them. This allows for neater-looking projects and better craftsmanship. Double-sided tape can be either thin or dimensional. Dimensional tape is thicker, and is of particular use to retail and signage uses where it can be used to allow signs or displays to stand out with a 3-D effect.

Double-sided tape is created by applying a thin adhesive layer to each side of a carrier material. For example, double-sided tissue tape, an easy-to-rip double-sided tape, is created by applying adhesive to two sides of tissue paper, which is then wound with a silicone paper to avoid it sticking to itself. Most adhesive tapes are manufactured in log form, such as a large 1 to 3 meter wide roll, and then an adhesive tape converter is used to slit the rolls into the required widths.